Food Safety Risk Assessment: A Guide for UK Kitchens
A food safety risk assessment is how you find out what could make your food unsafe, and decide what you will do about it. In HACCP terms it is called a hazard analysis. It is the first step of every food safety management system, whether you use a full HACCP plan or an FSA pack such as Safer Food, Better Business.
This guide explains what the law asks for, the four types of hazard, how to judge which ones matter, and what to write down. It is written for cafés, restaurants, takeaways and caterers in the UK.
Do you need one?
Yes, if you run a food business. GOV.UK says every food business needs a food safety management system, and that system must meet the HACCP principles. The first HACCP principle is to identify the hazards. The rule comes from Article 5 of Regulation 852/2004, which still applies in the UK.
The law expects a system that fits the size of your business. GOV.UK says your procedures should be appropriate for the size and scale of what you do. Most small caterers can use a pack:
- England and Wales: Safer Food, Better Business (SFBB)
- Northern Ireland: Safe Catering
- Scotland: CookSafe
GOV.UK says SFBB and Safe Catering give a simpler approach if your food processes are simple. Food Standards Scotland says CookSafe helps caterers in Scotland put HACCP based systems in place. Filling in the pack for your own kitchen covers this step for many small caterers. Larger or more complex businesses may need a full HACCP plan. Our guide to food safety management systems explains which system fits.
Hazard and risk: what is the difference?
A hazard is something that could make food unsafe or unfit to eat. The FSA's MyHACCP guidance puts it simply: something with the potential to cause harm.
A risk assessment asks two questions about each hazard: how likely is it to happen, and how bad would it be if it did? MyHACCP ranks hazards by these two things, likelihood and severity.
The four types of hazard
MyHACCP says hazards may be physical, chemical, allergenic or microbiological.
| Type | Examples from FSA guidance | |---|---| | Microbiological | Salmonella in raw chicken, E. coli O157 in raw beef mince, Listeria from condensation | | Chemical | cleaning chemicals, residual detergent, pesticide residues | | Physical | stones in chick peas, bones in fish, glass from a broken light fitting | | Allergenic | an allergen in a dish that is not declared to the customer |
How hazards get into food
MyHACCP describes four ways a hazard can arise. Thinking through each one stops you missing things.
- Presence: it is already in the raw food, such as Salmonella in raw chicken.
- Introduction: it gets in during your process, such as glass from a broken light.
- Growth: bacteria multiply, such as Clostridium perfringens growing while food cools.
- Survival: it survives a step meant to remove it, such as Clostridium botulinum spores surviving cooking.
Step by step: doing the assessment
1. Map your process
List every step food goes through, from delivery to service. A typical café might have: delivery, storage, preparation, cooking, cooling, reheating, hot holding and service.
2. List the hazards at each step
At each step, ask which of the four hazard types could be present, introduced, grow or survive there. Write them all down at this stage, even small ones.
3. Score how serious each one is
MyHACCP scores severity from 1 to 3, based only on what would happen if the hazard reached the customer. Its examples:
- 1 (low): a taint with no chemical contamination, discolouration, a wrong "best before" date
- 2: Norovirus, Campylobacter, Bacillus cereus, residual detergent, a foreign object unlikely to be swallowed
- 3 (high): E. coli O157, Salmonella, Clostridium botulinum, sharp glass or metal, food allergens
It scores likelihood from 1 (low) to 3 (high). To judge it, use what you know about the food, published guidance and the history of that hazard.
4. Decide which hazards are significant
MyHACCP combines the two scores into a significance score out of 9. You choose a threshold. Hazards at or above it go on to the next HACCP step, where you decide whether they need a critical control point. MyHACCP says hazards below it are controlled through effective prerequisite programmes, the good hygiene basics your kitchen runs every day.
5. Set your controls
For each significant hazard, decide how you will prevent it, remove it or reduce it to a safe level. GOV.UK lists the usual parts of a food safety system: cleaning and hygiene rules, safe cooking and storage, allergen controls, staff training and temperature checks.
For temperature controls, these are the limits in Pro Plato's own records: fridges at 5°C or below, freezers at -18°C or colder, food cooked to a core of 75°C or above before hot holding, then held at 63°C or above. Our food safety temperatures guide covers each one.
What to write down
GOV.UK describes a food safety management system as a written set of processes, checks, rules and records. Keep:
- your process steps and the hazards you found at each one
- how you scored them and which you treated as significant
- the control for each significant hazard
- records of your checks, and what you did when something went wrong
If your business is involved in a food safety incident, GOV.UK says you will need to show your records.
Keeping it up to date
A risk assessment is not a one off job. The law says you must review your procedures when you change a product, a process or any step. MyHACCP recommends reviewing your whole HACCP system at least once a year. New dishes, new suppliers and new equipment are all reasons to look again. Our guide to a food safety audit explains how to check your system is working.
Pro Plato keeps your daily checks on your phone. The Compliance Engine plan (£49 a month) adds a HACCP plan builder with version history, risk assessments and a print ready inspection pack.
Frequently asked questions
Is a food safety risk assessment the same as HACCP?
It is the first part of it. HACCP stands for Hazard Analysis and Critical Control Point. The hazard analysis is the risk assessment; the rest of HACCP sets limits, checks and records for the hazards you found.
Does SFBB count as a risk assessment?
For many small caterers, yes. GOV.UK says SFBB and Safe Catering give a simpler approach if your food processes are simple. You still need to fill it in for your own kitchen and keep the diary.
What are the four types of food hazard?
Microbiological, chemical, physical and allergenic. MyHACCP lists all four.
How often should I review my food safety risk assessment?
Whenever you change a product, process or step, and MyHACCP recommends a full review at least once a year.
Sources
Checked 18 November 2026.
- GOV.UK: Food safety management systems for businesses
- GOV.UK: Hazard analysis and critical control point (HACCP)
- FSA MyHACCP: Principle 1.1, identify and list potential hazards
- FSA MyHACCP: Principle 1.2, conduct a hazard analysis
- FSA MyHACCP: Principle 6, verification
- FSA: Safer Food, Better Business
- FSA: Safe Catering
- Food Standards Scotland: CookSafe guide
- legislation.gov.uk: Regulation (EC) No 852/2004, Article 5
Note: this is general guidance for UK food businesses, not legal advice. Rules differ slightly across England, Wales, Scotland and Northern Ireland, so follow your local authority's advice. Last checked 19 November 2026.
